When Simple Control Panel is used in conjunction with the Cisco PIX 501 hardware firewall, two processes may be affected: the external resolution of domains while running DNS, and the mapping of domain IP addresses through the firewall.DNSWhen setting ...

Inside and outside interfaces allow for the creation and modification of firewall access rules.To Configure Cisco PIX 501 InterfacesIn a Web browser, navigate to: https://[your firewall management IP address]/ You may receive a number of security certi...

When a hosting server that has run without a Cisco PIX 501 hardware firewall has one added, a re-mapping of Web site IP addresses is required. When the firewall is installed, it inherits the server's public IP addresses. The server runs on private IP a...

The certificate errors that occur when connecting to the Cisco PIX 501 Firewall Device Manager are the result of Cisco using a self-signed SSL certificate instead of one signed by a third party. You can safely accept the certificate and save it as "Tru...

POWERHOSTER.COM monitors Cisco PIX 501 firmware and performs upgrades when necessary. You will not have to perform this operation yourself.

If you encounter an error when attempting a Plesk FTP backup of your domain (during either a manual or scheduled FTP backup), Plesk has released fixes for versions 7.5.4, 7.5.5, and 7.5.6 that eliminate the root cause of these errors.To Implement the P...

To configure Smarthost on a Windows server using MailEnable:Log in to your Windows Server Remote Desktop as "administrator" Click on Start and go to All Programs. Under the MailEnable menu, select MailEnable Administrator. Expand the MailEnable Managem...

Symptoms:Plesk Name Server is not listed in the Plesk Services Monitor. You have loaded a domain into Plesk for hosting, but the server is not serving DNS for the domain. Cause:If you provisioned or reprovisioned your Dedicated Windows Plesk 8.1 server...

To Configure Cisco PIX 501 Firewall Access RulesIn a Web browser, navigate to: https://[your firewall management IP address]/ You may receive a number of security certificate warnings. If you accept the certs and save them as "Trusted," you will avoid ...

To Configure Cisco PIX 501 Firewall Access RulesIn a Web browser, navigate to: https://[your firewall management IP address]/ You may receive a number of security certificate warnings. If you accept the certs and save them as "Trusted," you will avoid ...