When Simple Control Panel is used in conjunction with the Cisco PIX 501 hardware firewall, two processes may be affected: the external resolution of domains while running DNS, and the mapping of domain IP addresses through the firewall.DNSWhen setting ...

When a hosting server that has run without a Cisco PIX 501 hardware firewall has one added, a re-mapping of Web site IP addresses is required. When the firewall is installed, it inherits the server's public IP addresses. The server runs on private IP a...

The certificate errors that occur when connecting to the Cisco PIX 501 Firewall Device Manager are the result of Cisco using a self-signed SSL certificate instead of one signed by a third party. You can safely accept the certificate and save it as "Tru...

Inside and outside interfaces allow for the creation and modification of firewall access rules.To Configure Cisco PIX 501 InterfacesIn a Web browser, navigate to: https://[your firewall management IP address]/ You may receive a number of security certi...

When Plesk is used in conjunction with the Cisco PIX 501 hardware firewall, two processes may be affected: the external resolution of domains while running DNS and the mapping of domain IP addresses through the firewall.DNSTo ensure DNS compatibility b...

POWERHOSTER.COM monitors Cisco PIX 501 firmware and performs upgrades when necessary. You will not have to perform this operation yourself.

Both the Enable and Telnet passwords for the Cisco PIX 501 can be reset through the Cisco Device Manager.To Change Cisco PIX 501 Hardware Firewall PasswordsIn a Web browser, navigate to: https://[your firewall management IP address]/ You may receive a ...

Translation rules must be added for all new IP addresses. When the Cisco PIX 501 hardware firewall is installed, the translation rules for existing IP addresses are created automatically.For each new IP address, you create two static translation rules,...

This process updates Plesk database records, modifies network adapters settings, reconfigures FTP and WWW servers, and updates DNS records.To Change Server IP AddressesRemote desktop onto your hosting server. Run Plesk Reconfigurator. Select Change Ser...

Adding the Cisco PIX 501 hardware firewall to an existing hosting account may result in problems with the external resolution of new domains. When a new domain is created through Simple Control Panel, a DNS zone record is created that associates the do...